Originally shared by Addidis no
Finished product: Slightly dusty (grey stuff) from filing.
How much time to print it? Looks really good.
The lid was around an hour, the bottom was about 3
belle réalisation
.35 layer height
No support
probably no brim it has it built in to the corners.
235C for makerfarm black abs. 110 bed.
This one was at 15mm/s after this finished I made it 10 times or more faster , it still printed fine , the lid parts by the headphone jack / av will melt a bit both mine did , the faster one is better but still needs filing.
The first lid took 1:45 the second one took like 15 mins.