Hopefully this may help someone - ! WARNING ! Check your heated bed.

Hopefully this may help someone - ! WARNING !
Check your heated bed.

Originally shared by Richard Horne

Warning! - Check your #3DPrinter heated bed - electrical mounting advice. CC @ChuckHellebuyck
https://www.youtube.com/watch?v=W8hBjBVwCYw&feature=autoshare

A nice compliment for @Josef_Prusa and his work on MK42 heated bed design. :wink:

Is there a way to just buy that new prusa’s heated bed?

@Step_Cia Not yet, only as a part of MK2 kit/assembled printer. (Checked.)

You can use silicone heated beds, it came with a sticker so you can stick it to an aluminum plate

@Step_Cia you can buy the MK42 from Prusa for $699, they’ll even throw in a free i3 MK2 with that!