Hi there! I made one Truggy too :-).

Archive OpenRC
,
1

Hi there!
I made one Truggy too :-).
Still working and playing with, but is complete enough to show it.
I use metal diffs, most part is from PETG (PlastyMladeč or Devil Design), front bumper is from Fillamentum Flex 98A.
I am trying to hide ESC and cables under the hood. Dealing with overheating, but new engine works much better.
Because I use monster truck tires, I have to create own rims for that.
Tires: HobbyKing® 1/10 Monster Truck 10-Spoke Black Wheel & Block Pattern Tire 12mm Hex (2pc) - not available now :frowning:
Rims: https://www.thingiverse.com/thing:2551411

Few upgrades planned - ball joints for shock absorbers, alu steering rods, rear bumper, bike lights mounts etc.

Who is interested more, here is full album (yeah, I started few months ago):

[132 new photos · Album by Gustavo Gustík] OpenRC Truggy (Gustavo Edition)

146e0c8c4cb605fe5a530011f02c82e5.jpeg
146e0c8c4cb605fe5a530011f02c82e5.jpeg4032×3024 2.35 MB

69ee0cd23d215d5a3a1c011a2bfcd4f9.jpeg
69ee0cd23d215d5a3a1c011a2bfcd4f9.jpeg4032×3024 1.87 MB

1d4353b07b87b3780a910cf1ff391b0b.jpeg
1d4353b07b87b3780a910cf1ff391b0b.jpeg4032×3024 2.08 MB

151100d9b8bcac9245d02c86d4c2b06d.jpeg
151100d9b8bcac9245d02c86d4c2b06d.jpeg4032×3024 1.68 MB

e4f49911e0647970afc11d8597daaab5.jpeg
e4f49911e0647970afc11d8597daaab5.jpeg4032×3024 1.57 MB

2

Wow, that looks great. Well done with all the mods also! Don´t forget to add it to the buildmap. =)

3

Very nice, I am interested in the front bumper is that 3d printed aswell?

Do you also have stl files of the top deck?

Where did you get the metal diffs from? I have been looking for that but unable to find unfortunately.

Great work!

4

@Gilbert_Tavenier Hi! Front bumper is printed too:

From this material:

I have STL of top deck, I can upload to Thingiverse if you like.

And metal diffs are from Aliexpress: https://www.aliexpress.com/item/2017-Preety-HSP-02024-Diff-Gear-For-1-10-RC-Car-Auto-Truck-Buggy-94123-94122/32811909950.html?spm=a2g0s.9042311.0.0.nfMelx

5

@Gustavo_Gustik thank you so much, I have been 3d printing for a few years now but this is the first time I am making anything with RC!