Hi guys, i have a problem with DXF made by Illustrator.

CAD & CAM Tool Chain LaserWeb/CNCWeb Suppport
1

Hi guys, i have a problem with DXF made by Illustrator.
When i try to load this file on LW3 it do not show nothing.
I gave you the file and a couple of screenshot.
File: http://www.filedropper.com/conoscerelinuxtarga1

7c77fd67d50759051aceefb9a5ad002f.png
7c77fd67d50759051aceefb9a5ad002f.png1280×800 192 KB

7cb1f2acd137f490f05dba2f1b9aff2a.png
7cb1f2acd137f490f05dba2f1b9aff2a.png1280×800 163 KB

2

Thx, now cut well.
I’m trying different powers for raster and vector, i use this guide https://en.vectorealism.com/getting-started/illustrator-starter-kit/ , but LW3 not see the differences and sets all at S100 power in Gcode.
Files: http://www.filedropper.com/archive_11

3

This is my configurations: https://s32.postimg.org/72kmhqns5/Screen_Shot_2016_08_04_at_12_07_01.png
Take a look at PWM, it’s 1000 not 255 in according with this guide http://blog.protoneer.co.nz/grbls-pwm-functionality-how-to-control-a-laser-or-variable-speed-spindle/ ( i tried with the multimeter and works well ).

4

I understand (: . I think I found the problem.
When i load SVG file, lw gives me only one laser power option, https://s31.postimg.org/rnjvqzcbv/Screen_Shot_2016_08_04_at_12_30_58.png.
But i made different colors http://imgur.com/a/oxAZa in according with this guide https://en.vectorealism.com/getting-started/illustrator-starter-kit/#vector-line-engraving

5

Thx Peter for your time! I feel so noob now :smiley: I will try the new features to give you a feedback.