Hi all! Still lovin' LaserWeb . . .

CAD & CAM Tool Chain LaserWeb/CNCWeb Suppport
1

Hi all! Still lovin’ LaserWeb . . . and still awaiting my Smoothie :slight_smile:

A quick question - is there a way to create multi-line macros?

With GRBL the instructions in the wiki don’t work for creating a laser test fire button . . . I can only get it to take an M3 S200 on one line and then M5 as a separate button. Ideally I’d like to create a button that ran an M3 S200 P0.5 M5 but it don’t work because I’m pretty sure that you can’t put all of those commands on the same line.

Is there a way to run a script as a macro?

Thanks again all!!

2

Check out this post, I found it by doing a search of the community with the word macro :wink: https://plus.google.com/+DavidCook42/posts/M3W7vFvB7zf

3

multiple gcodes on one line are supported by smoothie, (and grbl AFAIK)

4

Ack! RTFM strike again. Got it guys … And thanks!
Just for the record - <M3 S200 \n P0.2 \n M5> works great for aligning the laser.

5

Strike one of my questions down…

6

:slight_smile: