Hi All, I am looking at taking the plunge and getting a Voiern WR4040

gplus
(Tek Creations) #1

Hi All,
I am looking at taking the plunge and getting a Voiern WR4040 machine. The stock one here

I see for ane xtra $320 I can get the ruida model, Now i definitely want a new controller, but would I be better getting the Ruida upgrade, or get the M2 and get a cohesion board myself and install (or any other drop in replacement boards)? this option is around an extra 200. Yes its cheaper but I’m not too sure if the 3rd parties stack up better then the ruida option
Any advice appreciated
https://www.aliexpress.com/item/WR4040-50W-Freeshipping-Co2-4040-laser-engraving-machine-cutter-machine-laser-engraver-DIY-laser-marking-machine/32821319084.html?spm=2114.search0104.3.15.76484513LH9Ak3&ws_ab_test=searchweb0_0,searchweb201602_5_10065_10068_10130_10547_319_317_10548_10696_453_10084_454_10083_10618_10307_538_537_536_10131_10132_10133_10059_10884_10887_100031_321_322_10103,searchweb201603_2,ppcSwitch_0&algo_expid=5865f745-980f-46d4-82b7-a9991de2615f-2&algo_pvid=5865f745-980f-46d4-82b7-a9991de2615f

(Anthony Bolgar) #2

I would get the Ruida. I have both the C3D and a Ruida, and the Ruida is more robust overall.

(0.45 NACL) #3

I agree with Anthony.