Hello There,
I’ve been using my Shapeoko 3 with chilipepper for the past couple weeks with any problem until today.
To keep it short, I was running a 3 hour job on chilipepper and after 2.5 hour the machine suddenly stops. It appears chilipepper is no longer buffering so my machine is stuck 80% of the job. Here is a snipped of the code and I a wondering if anyone encounter the problem with the job freezing in midway? Anyway of avoiding grbl machine running on chilipepper from losing communication?
–truncated–13643" class=“out”> N13643X0.8256Y-1.1077
N13644X0.8711Y-1.0982
N13645X0.9063Y-1.0871
N13646X0.9397Y-1.0718
N13647X0.9805Y-1.0454
N13648X1.0153Y-1.0157
N13649X1.0449Y-0.9810
N13650X1.0722Y-0.9388
N13651X1.0838Y-0.9137
N13652X1.0985Y-0.8717
N13653X1.1073Y-0.8260
N13654X1.1103Y-0.7791
N13655Y-0.2367
N13656X1.1595
N13657Y-0.1875
N13658X1.0474
N13659X1.0468Y-0.7805
N13660X1.0436Y-0.8278
N13661X1.0312Y-0.8750
N13662X1.0178Y-0.9065
N13663X0.9986Y-0.9380
N13664X0.9721Y-0.9695
N13665X0.9372Y-0.9991
N13666X0.9084Y-1.0167
N13667X0.8719Y-1.0325
N13668X0.8270Y-1.0438
N13669X0.7955Y-1.0464
N13670X0.1813Y-1.0468
N13671X0.1770Y-1.0482
N13672X0.1770Y-1.1591
N13673X0.7801
N13674X0.8318Y-1.1566
N13675X0.8835Y-1.1459
N13676X0.9241Y-1.1330
N13677X0.9634Y-1.1151
N13678X1.0100Y-1.0849
N13679X1.0502Y-1.0506
N13680X1.0845Y-1.0105
N13681X1.1154Y-0.9626
N13682X1.1294Y-0.9322
N13683X1.1461Y-0.8845
N13684X1.1562Y-0.8323
N13685X1.1595Y-0.7806
N13686Y-0.2367
N13687G0Z0.1000
N13688G0X-1.1098Y-0.2474
N13689G1Z-1.9211F31.0
N13690G1Z-1.9734F8.0
N13691G1Z-1.9734F31.0
N13692X-1.1101Y-0.7769
N13693X-1.1071Y-0.8251
N13694X-1.0976Y-0.8753
N13695X-1.0821Y-0.9172
N13696X-1.0697Y-0.9425
N13697X-1.0458Y-0.9801
N13698X-1.0275Y-1.0018
N13699X-0.9925Y-1.0359
N13700X-0.9621Y-1.0576
N13701X-0.9309Y-1.0764
N13702X-0.8987Y-1.0902
N13703X-0.8624Y-1.1003
N13704X-0.8159Y-1.1084
N13705X-0.7685Y-1.1099
N13706X-0.2473
N13707Y-1.0960
N13708X-0.7793
N13709X-0.8296Y-1.0929
N13710X-0.8839Y-1.0802
N13711X-0.9244Y-1.0638
N13712X-0.9651Y-1.0392
N13713X-1.0056Y-1.0053
N13714X-1.0359Y-0.9701
N13715X-1.0598Y-0.9322
N13716X-1.0789Y-0.8874
N13717X-1.0912Y-0.8402
N13718X-1.0960Y-0.7805
N13719Y-0.2474
N13720X-1.1098
N13721Y-0.1982
N13722X-1.1590
N13723X-1.1593Y-0.7785
N13724X-1.1560Y-0.8313
N13725X-1.1452Y-0.8885
N13726X-1.1274Y-0.9367
N13727X-1.1127Y-0.9666
N13728X-1.0855Y-1.0093
N13729X-1.0635Y-1.0353
N13730X-1.0242Y-1.0738
N13731X-0.9892Y-1.0988
N13732X-0.9534Y-1.1203
N13733X-0.9150Y-1.1368
N13734X-0.8732Y-1.1483
N13735X-0.8210Y-1.1575
N13736X-0.7692Y-1.1591
N13737X-0.1981
N13738Y-1.0482
N13739X-0.2282Y-1.0468
N13740X-0.7793
N13741X-0.8266Y-1.0438
N13742X-0.8720Y-1.0325
N13743X-0.9053Y-1.0185
N13744X-0.9341Y-1.0010
N13745X-0.9683Y-0.9732
N13746X-0.9986Y-0.9380
N13747X-1.0179Y-0.9065
N13748X-1.0313Y-0.8750
N13749X-1.0436Y-0.8278
N13750X-1.0468Y-0.7805
N13751Y-0.2136
N13752X-1.0628Y-0.1982
N13753X-1.1098
N13754G0Z0.1000