Hello 3D Printing Group, We are having a fun and FREE webcast July 10,

Hello 3D Printing Group,

We are having a fun and FREE webcast July 10, 2013

3D Printing: What You Need to Know to Build Your Own 3D Printer

In this webcast, we will introduce you to an open source 3D Printer that we built from a kit. We’ll share experiences of both joy and tears, from assembly and tuning, to modeling and printing. We’ll cover the kinds of open source models, compare their commercial counterparts, talk about heat, plastic types and potential. If you are curious about 3D printing, but don’t know much about it, we hope to cover all of the basics.

If you have been doing your research, but have some pointed questions that will get you off the fence, we hope to answer those too. By the end of the session, we hope you will all want to build 3D printers of your own, and have all of the information you need to get started.

Register for Free Here: http://oreillynet.com/pub/e/2647

#3dprinting #3dprinter #Webcast #Webinar #opensource