Guys , i got a quite cut spindle and i have it up and

gplus
(Kurt Schuppert) #1

Guys , i got a quite cut spindle and i have it up and running . i have a question about what could be turning on the quite cut as soon as i turn on my tinyg . here is a copy of my settings please take a look at and let me know if you think they are correct . https://www.dropbox.com/s/zbix1wcvdmu3o4y/tinyg%20settings%20as%20of%209-7-15.txt?dl=0

(carl j mcgrath) #2

Set $p1pof = 0.0, it is currently [p1pof] pwm phase off 0.100 [0…1].

(carl j mcgrath) #3

More discussion here https://dl.dropboxusercontent.com/u/50261731/Spindle%20Test%201.doc

(Kurt Schuppert) #4

thank you that fixed it