Graber i3: Day 2 It does not seem that the Graber makes progress.

3D Printing
,
1

Graber i3: Day 2
It does not seem that the Graber makes progress. But If you come closer there is progress:

  • The timing belt is now attached to the printbed (It was not clear how to do that.)
  • The printbed itself is ready to work (consists of “MDF” and glass).

Thanks @Whosa_whatsis for his advice :slight_smile:

4e1481115f6f8d15565706cabafa6786.jpeg
4e1481115f6f8d15565706cabafa6786.jpeg2048×1536 354 KB

b90a1d2daa7ab5fffa3519fe0cb2968a.jpeg
b90a1d2daa7ab5fffa3519fe0cb2968a.jpeg2048×1536 416 KB

68a879cb13dcfd4ed5a75580711ccfa4.jpeg
68a879cb13dcfd4ed5a75580711ccfa4.jpeg2048×1536 375 KB

1928ef9a7e86996780da4262a1bc29f4.jpeg
1928ef9a7e86996780da4262a1bc29f4.jpeg2048×1536 268 KB

2a63255c866b7a6ea6c328652ec8ebdc.jpeg
2a63255c866b7a6ea6c328652ec8ebdc.jpeg2048×1536 337 KB