Google+ post by Todd Fleming on 2016-11-14 00:47:47 UTC

[Todd_Fleming]

V Carve

[Ariel_Yahni_UniKpty]

I’ve been waiting for this, thanks

[Alex_Krause]

Ohhhhhhhh yeah!!! Love Vcarve

[Alex_Krause]

Is clearance the size of the bit at the largest part of its diameter

[Todd_Fleming]

Clearance is how high it moves above Z=0 for rapids. It assumes an infinite cutter size.

[Alex_Krause]

here is a screen shot from vectric’s tool geometry and vcarve settings don’t know if it will help or not