Frankenbot print #7. Orange is from the Smartrap a couple weeks ago and grey

3D Printing
,
1

Frankenbot print #7. Orange is from the Smartrap a couple weeks ago and grey is from the Frankenbot

I need to fix the z acme rod mounts so that the z banding goes away, and I have he y axis flipped so I will have to flip the endstop and direction. Otherwise it looks pretty good to me. Comments appreciated!!

Issues are simple to fix. Not too bad for one of the first prints in my opinion haha

58d2f6f7085f65dccf46baca66f2c173.jpeg
58d2f6f7085f65dccf46baca66f2c173.jpeg2048×1536 317 KB

65a9f54a5d27ad9afdae1f152c9894e9.jpeg
65a9f54a5d27ad9afdae1f152c9894e9.jpeg1536×2048 244 KB

65b4668a3c800eed4cea7dfa77e26758.jpeg
65b4668a3c800eed4cea7dfa77e26758.jpeg1536×2048 303 KB

9bcd1e2b4c56d1da5e65da9b16675c20.jpeg
9bcd1e2b4c56d1da5e65da9b16675c20.jpeg1536×2048 707 KB

2

What is the diameter of the smooth rod you are using?

3

Looks pretty good, man!

4

Thanks Brook!

And its 12mm smooth rod all around.

5

Pretty huge smooth rods, god bless.

6

And printing Rostock carriages, right? :slight_smile:

7

Yes haha!! Rostock mini pro. It’s a favorite of mine to print as I feel it has good tests of fitment, straights, and curves. Plus I want a delta haha!