First test piece for in carriage direct drive extruder module for the HercuLien.

First test piece for in carriage direct drive extruder module for the HercuLien.

Hahaha, nice!

Great!!!

Fast furious! :wink: Is it PLA or ABS?

@Maxim_Melcher ABS

Big thanks to @Tim_Rastall & @Jason_Smith . My #Eustathios ( #Ingentis variant ) is such a great printer to have. Really a speed demon. Again this is only 50mm/s speeds. But with the machines high acceleration values print completion times are really quick.

It allows me to prototype model, print, review, tweak the model, then print the final at higher quality settings in a small time frame. Without it I could have never made my new #HercuLien large format printer.

Like you said, that looks fast ! what are the temps used ? (head / bed)

@Jean-Francois_Coutur Hotend=239C, Bed=110C

I’m about to start a ABS print as we speak… thats about what I have on my prusa2… head= 230, bed= 110C

I will look tonight to make sure I still have it.

@Shauki this was printing the on carriage direct drive version. No tabs for mounting, and holes added to bolt it down to the carriage top. Plus a nub that acts as an alignment pin into an existing hole.