first prints for a clock design I got off thingiverse.

3D Printing
,
1

first prints for a clock design I got off thingiverse. It never gets old getting a good print out of my printer.

b1e0c91ff63c2d6b6bd27c73333e874e.jpeg
b1e0c91ff63c2d6b6bd27c73333e874e.jpeg1536×2048 926 KB

aa66c1eb4c048ea5efa39875540a26b0.jpeg
aa66c1eb4c048ea5efa39875540a26b0.jpeg1536×2048 911 KB

c424e6bef2b4317d17ef65a2950a7c4e.jpeg
c424e6bef2b4317d17ef65a2950a7c4e.jpeg2048×1536 692 KB

2

Tat is a good printout u got there. What material, slicer n the setting u use? I try to print some gears n it doesn’t look good

3

Have a link?

4

@Sonex128 Going to take a wild guess and say it’s probably this: http://www.thingiverse.com/thing:1249221

5

@Shai_Schechter actually it is this one: http://www.thingiverse.com/thing:328569

6

@tommy_chiu sorry for the late response, I didn’t notice the comment. I’m using PLA heated to 210. the slicer is Cura on default setting for the Printrbot Simple Metal. If you want all the settings just contact me and ill send them to you

7

@Sonex128 http://www.thingiverse.com/thing:328569