Figured I would share,

General CNC CNC Routers
,
1

Figured I would share, it’s part r7 :slight_smile:

Originally shared by Mark Leino

Here is my latest project. Building it for plasma torch only. 5’x8’ size. Made some custom splice brackets, will post more progress as I make it. It’s going to be all gt3 belts doubled up. The red plates are based off an r7, and stock ox gantry plates that have been just laying around…

e48d1d29a174c78b71193d5814f0e7ba.jpeg
e48d1d29a174c78b71193d5814f0e7ba.jpeg1836×3264 918 KB

a90b9e0d65974b1a4a760778b379c3cd.jpeg
a90b9e0d65974b1a4a760778b379c3cd.jpeg1836×3264 841 KB

1ea747937e29d8b508690492c8f0c671.jpeg
1ea747937e29d8b508690492c8f0c671.jpeg1836×3264 965 KB

b0501f064e0a722b4b8b416c12195a77.jpeg
b0501f064e0a722b4b8b416c12195a77.jpeg3264×1836 1.66 MB

2

That’s a big project. Looks good. Good luck with it.

3

@Mark_Leino This is the reason I originally got the R7! I’ll be following you on this one!

4

@Mark_Leino When you get to THC let me know. :slight_smile: