Feeds and Speeds blog post from SMW3D, courtesy of the wayback machine!

Wayback machine to the rescue!


I remember making those graphics :slight_smile:

1 Like

@Eclsnowman Is the google spreadsheet with only a partial link still preserved? If so, want to share the link?

@Brandon_Satterfield Any objections to copying that content directly into makerforums attributed to you?

I think copying over the content and attributing that to Brandon would be sufficient. I’m pretty sure he’s fully out of the game at this point, and back into the fun world of oil and gas. But I’ll let him know and confirm on that. For the speeds and feeds I think that was originally shared by Brandon can certainly share the link though.

One of my sheets: https://docs.google.com/spreadsheets/d/1ThIW9tmWwfqLe3902FIlsAVMScLBhy8cubHR4VAqL5U/edit?usp=drivesdk

R7 and Ox group speeds and feeds sheet: https://docs.google.com/spreadsheets/d/1zwIDGWKhJyOdxmYnStDJWpRCtvTDhMzocLV17pebG5I/edit?usp=drivesdk

1 Like

You guys are awesome! Please use anything I attributed to freely as long as any related parties agree!
Those were awesome graphics!
We had a group contributes to excel sheet of speeds and feeds around somewhere as well. Intent was to make some HTML look up tool.
Have a great holiday my friends!


Thanks much!

I imported it, as authored by @Brandon_Satterfield, and turned it into a wiki topic that we can all contribute to maintaining over time:


@SirGeekALot Feel free to keep spelunking the wayback machine! :slight_smile:

1 Like