Cool!
An open source (V14) or freeware (normal) #FEM analysis.
With tutorials.
Reading STEP and STL.
I didn’t know about this.
http://www.z88.de/
Cool!
An open source (V14) or freeware (normal) #FEM analysis.
With tutorials.
Reading STEP and STL.
I didn’t know about this.
http://www.z88.de/
I tried this last summer. Seemed pretty good apart from the post processor displayed strange units. I was testing with a 10 cube with 10 units of force to prove modulus = stress / strain however the results were always unexpected. I will try it again soon to see if newer releases are more useable.