Constant Velocity Image Rastering using grbl derivative at a feedrate of 14.5 K or

Constant Velocity Image Rastering using grbl derivative at a feedrate of 14.5 K or 240 mm/sec Laser Max at 50% or 10 milli amps.
missing/deleted image from Google+

Nice…I like the overshoot beyond the image so coming back in on the next line you aren’t accelerating right at the edge. This is what I need on my lasers.

+Peter van der Walt Sorry I am just getting to this I blew a connect that gos to my Y Stepper Motor. So I did the test on my converted Full Spectrum still same Arduino Based Controller.
https://plus.google.com/107520953345127905250/posts/eXsVcdVarLc
https://plus.google.com/107520953345127905250/posts/eXsVcdVarLc

@Michael_Audette Thanks :slight_smile:

Thanks Matt :slight_smile: