CNC Remote for Laserweb:

CAD & CAM Tool Chain LaserWeb/CNCWeb
,
1

CNC Remote for Laserweb:

All buttons and switches are hocked up to the Arduino Pro Micro. So far everything works. :slight_smile:

Next step will be to assign the corresponding keystrokes. I expect some headache with the MPG when it generates a massiv amount of pulses (while turning the wheel fast).

Edit: Initial post about this project:
https://plus.google.com/+KurtMeister/posts/9e8eSucAqkB

5f96632a8e0fbc6b83560bb6e2bb0c2f.jpeg
5f96632a8e0fbc6b83560bb6e2bb0c2f.jpeg4032×3024 1.21 MB

f7ffe9c4532244ac7b240d6897d86d34.jpeg
f7ffe9c4532244ac7b240d6897d86d34.jpeg4032×3024 933 KB

2

Looks really promising

3

following this project, looking forward to the finished version and write-up!