Beautiful work as always by Walter Hsiao ​

Beautiful work as always by @Walter_Hsiao

nice sleek design! kudos @Walter_Hsiao

Jesus, how did you get such clean lines? WOW!

Nice looking prnt @Walter_Hsiao I was showing some people how perfect your prints are. May I ask what your typical print speeds are on your RigidBot to achieve that quality?

@Isaac_Arciaga For normal plastics, it’s almost always 40-50mm/sec, 0.15mm layers, with outer perimeters at 50%. Acceleration is usually at 2000.

@Walter_Hsiao is just a pro when it comes to printable parts design. and printing. and photographing prints :slight_smile: thumbsup