After i finished the Eustathios Spider V2 last year,

3D Printing HercuLien and Eustathios
1

After i finished the Eustathios Spider V2 last year, i decided to build a smaller one from an old Cl260 (ultimaker clone) Frame: Eustathios Mini.
Workspace 180x180x220mm
Let the pictures speak for itself:

8a9dd688455428eb6abed8bf3f84a9f7.jpeg
8a9dd688455428eb6abed8bf3f84a9f7.jpeg4032×3024 2.41 MB

dcbc6b623ece7c52057d1d9b4d1f9836.jpeg
dcbc6b623ece7c52057d1d9b4d1f9836.jpeg3024×4032 2.25 MB

6344f4c578d300a271df77c9eab41a2f.jpeg
6344f4c578d300a271df77c9eab41a2f.jpeg3024×4032 2.31 MB

66c42e83a471ee032bf09aad635e5d2a.jpeg
66c42e83a471ee032bf09aad635e5d2a.jpeg4032×3024 2.31 MB

cc0cd73bf2dbd1005814c799923c20d0.jpeg
cc0cd73bf2dbd1005814c799923c20d0.jpeg3024×4032 2.53 MB

1e867d30800fa99594673b3d397ab201.jpeg
1e867d30800fa99594673b3d397ab201.jpeg3024×4032 2.16 MB

ee59ebc359b2e4c7d39225c5828582fc.jpeg
ee59ebc359b2e4c7d39225c5828582fc.jpeg3926×2947 2.72 MB

2

Sorry this got caught in the g+ spam filter.

Looking great. Thanks for sharing. How’s it running for you so far?

3

Btw I love the wood base. Adds a certain styling compared to the normal acrylic base.

4

So far, i’ very happy with the built. With this one, i tried a cheap 8bit setup with:
MKS Gen 1.4 > Marlin 1.1.8
TMC2008 from Watterott except the Extruder (E3D Titan) A4988. Ran in trouble with the TMC2208 on it. Travel Movement on x and y 350mm/s without a Problem