3D print successfully completed:

gcodeprintr-showtell
gplus
(Mathias Dietz) #1

3D print successfully completed: SattleClampV2_0.2mm_dual_.gcode

The print time was 0:00:13
4,81 m material has been used 
Cost of material is 1,28€
Average print speed was 37.73mm/s

Printed with #GCodePrintr for Android - http://gcodeprintr.dietzm.de/social

(Mathias Dietz) #2

testing the new “Share” feature to share a summary of the completed print …