Vehicles   OpenRC


Topic Replies Activity
About the OpenRC category 1 March 16, 2019
Hello, i am new to the community, 1 February 22, 2019
I need front suspension arms for a kyosho mad force but I have no 2 January 7, 2019
Coming along! now the big wait on axles and parts 4 January 6, 2019
Hello, I'm actually printing the first parts for the 1/10 Truggy, 1 January 6, 2019
Aftermath of first solo drive by my son! He was a little upset with 1 December 26, 2018
Much love to everyone in this group! https://danielnoree.com/birthplace-openrc-community-finally-shutting/ 3 December 24, 2018
A few thoughts on the OpenRC F1 2019 updates: 1 December 7, 2018
Does anyone know a screwset that includes ALL the screws needed for this project? 2 December 7, 2018
Google is planning to Axe G+, 3 December 5, 2018
Google+ post by Engineering Nonsense on 2018-12-01 16:50:44 UTC 1 December 1, 2018
Here´s some more flying with the OpenRC FPV Mini Quad: 1 November 28, 2018
For those looking for the q&a or other resources at the danielnoree_com site, 2 November 22, 2018
Interview with the master behind the OpenRC project Daniel Noree! Daniel, 2 November 19, 2018
My son and I are just starting the project as well. 3 November 3, 2018
need help, i would to build the 1/10 touring cars , 2 November 3, 2018
i'm looking for sourceable tires for the truggy that will fit the rims, 1 November 1, 2018
I have a serious hard time to print out working gears for the truggy. 4 October 9, 2018
Hello Everyone, my name is Alex, new here. 2 October 6, 2018
Here is another question.. 1 October 6, 2018
Hi Guys, i do have trouble with the differentials. 2 September 27, 2018
Hello all. I am beginner to rc world I have planned to make simple 2 September 27, 2018
Terrible for the car, 1 September 27, 2018
Google+ post by 林沛 on 2017-06-07 18:49:19 UTC 2 September 22, 2018
What type of toothed belt is used to connect the front and rear drive!? 4 September 20, 2018
So I've soldered the wires to the ESC controller. 7 September 18, 2018
If you´ve missed it, 1 September 16, 2018
https://www.youmagine.com/designs/3d-printed-jet-boat-v2 Fully 3D printed including impeller and jet drive unit. 7 September 13, 2018
Hello , im new. Im going to start to print the f1. 4 September 13, 2018
Does anyone know where I can get the .F3D files or at least the 2 September 13, 2018