Vehicles


OpenRC Ask and answer questions about the OpenRC Projects, show off prints, and discuss ideas for future OpenRC Projects. DIY UAVs All about amateur Unmanned Aerial Vehicles (UAVs) and their many non-military uses.
Topic Replies Activity
About the Vehicles category 1 March 16, 2019
Affordable multi-frequency GNSS receiver on Kickstarter! 1 May 20, 2019
3d printed nose cone for mapping aircraft 1 March 21, 2019
Helium UAV 5 March 18, 2019
Hello, i am new to the community, 1 February 22, 2019
Just thought I would share a nice autonomous landing from this afternoon. 1 January 11, 2019
I need front suspension arms for a kyosho mad force but I have no 2 January 7, 2019
Coming along! now the big wait on axles and parts 4 January 6, 2019
Hello, I'm actually printing the first parts for the 1/10 Truggy, 1 January 6, 2019
Aftermath of first solo drive by my son! He was a little upset with 1 December 26, 2018
Much love to everyone in this group! https://danielnoree.com/birthplace-openrc-community-finally-shutting/ 3 December 24, 2018
``Ten years ago, when I started this site, 2 December 19, 2018
New folding drone that can squeeze through gaps, flatten against walls for up-close views, 4 December 13, 2018
A few thoughts on the OpenRC F1 2019 updates: 1 December 7, 2018
Does anyone know a screwset that includes ALL the screws needed for this project? 2 December 7, 2018
Google is planning to Axe G+, 3 December 5, 2018
Google+ post by Engineering Nonsense on 2018-12-01 16:50:44 UTC 1 December 1, 2018
UMN flight testing this afternoon. 1 December 1, 2018
Here´s some more flying with the OpenRC FPV Mini Quad: 1 November 28, 2018
For those looking for the q&a or other resources at the danielnoree_com site, 2 November 22, 2018
Interview with the master behind the OpenRC project Daniel Noree! Daniel, 2 November 19, 2018
My son and I are just starting the project as well. 3 November 3, 2018
need help, i would to build the 1/10 touring cars , 2 November 3, 2018
i'm looking for sourceable tires for the truggy that will fit the rims, 1 November 1, 2018
I have a serious hard time to print out working gears for the truggy. 4 October 9, 2018
Hello Everyone, my name is Alex, new here. 2 October 6, 2018
Here is another question.. 1 October 6, 2018
Hi Guys, i do have trouble with the differentials. 2 September 27, 2018
Hello all. I am beginner to rc world I have planned to make simple 2 September 27, 2018
Terrible for the car, 1 September 27, 2018