Laser Engravers/Cutters


Topic Replies Activity
Has anyone cut plexiglass yet on the FABkit? What thicknesses and speeds? 4 May 25, 2017
Small modifications made: Enabled IP on Smoothie Small switch to connect Smoothie and Pipo, 26 May 21, 2017
My son has a small vegetable garden, 11 May 8, 2017
Project #1 being completed 15 May 8, 2017
New project: engraving and cutting leather... 10 May 8, 2017
Originally shared by CescoAiel A few experiments on the FABkit and LW4 for my 1 April 21, 2017
Before I start tinkering with settings (I assume this has to do with the 18 April 17, 2017
Got some issues with engraving consistency, 25 April 15, 2017
FabCreator Bonne Wilce QQ: 13 April 15, 2017
Latest project: Raphael sigil in Opalite 1 April 13, 2017
Not sure whether this is a FABkit, Smoothie or LaserWeb4 issue... 2 April 7, 2017
Originally shared by Maxime Favre Looks like it's working :) 3mm mdf 1 April 6, 2017
Sharing here ;) http://communities.fabcreator.com/t/the-swiss-fabkit/36/22 Originally shared by Maxime Favre Setup of the fabkit: 4 April 4, 2017
Final result... The colour difference in the engraving is due to the poplar-plex not 11 April 2, 2017
Bonne Wilce Just a small remark, and I do not know why, 4 March 31, 2017
Ok, I may be doing things wrong, 9 March 31, 2017
Sharing here too ;) Originally shared by Maxime Favre Fabkit day 2: 1 March 30, 2017
Originally shared by Maxime Favre The wait is over, 4 March 29, 2017
Busy making some new "marketing" material so we can show off the FabKit! Any 2 March 24, 2017
I was looking for some smoothie config info on the wiki and it seems 5 March 23, 2017
First successful test... 7 March 18, 2017
Latest LW4 installers Originally shared by Peter van der Walt LW4 Installers for OSX, 8 March 13, 2017
Anyone using LW4 on the FABkit? 14 March 13, 2017
I've got all axes working from the system, 9 March 12, 2017
Any news about the shipping ? 4 March 10, 2017
Pinned post, Make sure you check out the new community site, 2 March 8, 2017
Google+ post by Krijn Schaap on 2017-03-06 21:17:10 UTC 1 March 6, 2017
Pictures of my unpacking and assembly. 45 March 6, 2017
Just back from Egypt, 7 March 6, 2017
Model is available for download, 1 March 1, 2017