Controllers   TinyG


Topic Replies Activity
Now the end year holidays are passed it is time to continue with my 1 January 9, 2017
Hi guys! want to ask something. 4 December 24, 2016
Originally shared by Frank Herrmann I'm so happy and proud to present my first 1 December 23, 2016
just wondering how long it will take to ship my TinyG? 1 December 2, 2016
For some time, I have a eShapeoko with TinyG v8 and Chilipeppr running nicely. 1 November 8, 2016
I have a TinyG v8 on an SO2 CNC. 12 October 30, 2016
Oh man, this morning i broke 2 expensive endmills. 6 October 10, 2016
A nice comment about TinyG Support: 1 October 7, 2016
Hello TinyG Group.  I want to thank Riley Porter for his help with my 1 July 25, 2016
Hi Friends, i try to find a solution for XATC and Tool length sensor 2 July 13, 2016
Just started having a problem with the TInyG - When I run some short 4 July 2, 2016
Woo Hoo, I just compiled TinyG2v9k (my board is a v9k).. 7 June 23, 2016
Originally shared by Frank Herrmann 25 minutes of accumulated knowledge about XATC! I'm proud 1 June 20, 2016
I am unable to probe using TinyG 442.04 with less than 18mm/sec feedrate. 2 June 14, 2016
Hi guys, thought this might be a better place to ask this question. 1 June 10, 2016
TinyG Flashing Via Avrdude. 5 June 9, 2016
Have a good one for you guys. 1 June 1, 2016
First I'd like to just say WOW! I've been using the TinyG for over 4 June 1, 2016
Finally decided to get round to setting up probing on my TinyG V9. 4 May 30, 2016
Having some trouble with limits and homing so though I'd express to see if 10 May 23, 2016
I would like to retract my previous statement regarding "no problems" I was in 24 May 23, 2016
I am having hell my tinyg v8 controller and I do hope someone can 19 May 23, 2016
For all Arduino Uno+gShield users... 1 May 18, 2016
I found something wrong while Z-axis homing. 14 May 11, 2016
Originally shared by Sebastian Szafran I finally connected the TinyG v.8 board today and 5 May 10, 2016
Not sure who else is toying with lasers and the TinyG, 6 May 2, 2016
Alden Hart Riley Porter Normally open (NO) probe is being used by folks for 4 April 26, 2016
Originally shared by Frank Herrmann I'm proud to present my XTC (eXtremly simple automatic 2 April 23, 2016
So I'm having arc issues. 3 April 18, 2016
Originally shared by Sebastian Szafran Bad luck, 6 April 18, 2016