CNC Routers   Show and Tell


Topic Replies Activity
About the Show and Tell category 1 January 30, 2019
Balance Bike milled with MaslowCNC 2 May 8, 2019
Sphinx CNC controller build 1 April 25, 2019
Wow, it is amazing how many interruptions you can run into with projects that 6 March 7, 2019
Nesting software Originally shared by Stephane Buisson Update for nesting your parts, 2 March 7, 2019
Thought I would go a bit bigger on the dragon carving. 23 March 3, 2019
Made this small angel decor art for my door It took about 2 hours 6 February 18, 2019
Building a 7 feet guitar , ;) Cheers. 5 February 18, 2019
Cabinet parts! I had to give up on having the router cut everything out. 6 February 6, 2019
Step one of the profile carving. 12 January 31, 2019
Google+ post by Jonathan Roeder on 2019-01-27 04:13:04 UTC 8 January 31, 2019
I figured I'd throw some paint on another carving. 10 January 19, 2019
Next up on my to do list! 1 January 19, 2019
I guess nobody else shares their carving projects on here? 23 January 9, 2019
Another XPS Foam board carving done. 26 January 3, 2019
Thanks for the foam cutting tips on your site Hobby- Fab ! I merged 4 December 27, 2018
During this carving, I ran into a small problem with a knot. 13 December 17, 2018
Machine is done and the first test cut was completed this evening. 1 December 16, 2018
So the physical build is complete and I wanted to share a couple of 23 December 15, 2018
A couple of gun calendars done! V-carved from a free file on another site. 4 December 11, 2018
I decided to go back and do some paint on this fellow. 1 December 9, 2018
Just FYI, I’m using the standard mounting plates from the parts library and I’m 4 November 18, 2018
Not perfect, but I am happy with it. 9"x12"x1" laminated Oak. 11 November 11, 2018
Another carving finished up this weekend. I guess I like dragons. 6 September 24, 2018
Need to do a tiny bit of touch up sanding. 14 September 20, 2018
Sneak peak. Just a simple one for a change of pace. 4 September 20, 2018
Had a slight mishap sometime during the 20 minutes I quit watching the machine, 7 September 19, 2018
Another project finished. Just a v-carving from some clipart. 7 September 18, 2018
I was missing something on my spoiler board, so..... 4 September 9, 2018
If you haven't already, 1 August 15, 2018