CNC Routers   Shapeoko


Topic Replies Activity
About the Shapeoko category 1 March 16, 2019
I have forsale some CNC parts. Take everything for $100 plus shipping. 4 March 1, 2019
Here's another scrollsaw pattern of Mr. David Bowie. 16 October 28, 2018
I'm looking for some advice on a Shapeoko 1 rebuild. 11 September 13, 2018
A few weeks ago I joined the club of Shapeoko owners too :-) Got 10 January 1, 2018
I've been busy making 2ft diameter signs on the XXL... 3 January 1, 2018
Has anyone mounted a mill upright on a wall? 3 January 1, 2018
Along the same lines, is a 4'x4' more problematic than a 2'x2'? 1 December 31, 2017
I have come to the conclusion that a 10pt font will not mill properly 8 November 24, 2017
Rough cutting my logo in aluminum... 1 November 8, 2017
I was hoping to upgrade my Shapeoko2 for a larger build area. 5 July 11, 2017
I keep making this a little bit better. 1 May 29, 2017
Saw this over on DIY CNC group. 1 May 4, 2017
Originally shared by Nathaniel Stenzel I need someone to test output from bucket_mill.py. 4 April 28, 2017
Originally shared by Nathaniel Stenzel I did more work on bucket_mill.py. 1 April 23, 2017
What type of bearing do I need to replace a missing wheel on the 4 April 20, 2017
Originally shared by Nathaniel Stenzel I made a collection for my bucket_mill.py project so 1 April 18, 2017
My bucket_mill.py project ( https://github.com/nathanielstenzel/bucket_mill ) seems to do okay with the toolpath. 2 April 17, 2017
Originally shared by Nathaniel Stenzel My bucket_mill.py project had some more issues closed and 2 April 14, 2017
Originally shared by Nathaniel Stenzel For what it is worth, 1 April 8, 2017
The Y movement on my Shapeoko2 was being a little jerky on the left 1 March 11, 2017
A little video I made of an idea I had that I wanted to 5 March 6, 2017
I wanted to share some pictures of my Suckit Dustboot attached to my Shapeoko 1 March 2, 2017
Hi! Can anybody help me get staight with GRBL? 13 March 1, 2017
Upgraded my Shapeoko 3 to the XXL had to get a new control board. 2 March 1, 2017
Hi Guys! Having a small issue here with my shapoko, 9 March 1, 2017
Originally shared by Nathaniel Stenzel Does anyone have the steps per mm for a 4 February 26, 2017
Yep, it's another dust shoe. 1 February 22, 2017
Need some help! I haven't used my Shapeoko in a while, 57 February 21, 2017
Hello guys, i need some help getting my shapoko 2 up and running again, 13 February 21, 2017