3D Printing   Electronics


Topic Replies Activity
About the Electronics category 1 January 30, 2019
$39 32-bit controller with 5 TMC2208 teased 1 May 11, 2019
If a stepper starts loosing steps in the middle of a print with nothing 16 January 3, 2019
I have a Re-arm question. 7 January 1, 2019
hello, 101hero the printer had a problem i guess. I print with simplify3d. 2 November 16, 2018
Did anyone built a resin printer utilizing the Projektorboard DLP2000 LightCrafter? 6 November 11, 2018
Nice laser if you want to add one to your printer: 9 November 10, 2018
I have got a new strange issue with my printers: 3 October 31, 2018
Hi All, Does anyone know if the 5V pins on the MKS Gen-L can 2 October 14, 2018
This is going to come a bit out of left-field... 24 September 23, 2018
Looking for a new controller... 28 September 18, 2018
Hope soon we(me and Darkberg Aryavis ) can release a new ultra cheap board 12 August 5, 2018
Hey to every electronic guys out there, 5 July 1, 2018
Obligatory Tree Frog Test. Custom 1M Delta with a Flex3drive. 16 June 9, 2018
I am running ramps 1.4 and marlin 1.1.6 with an E3D hot end. 6 June 8, 2018
I am working on consumer grade 3d printer build. 5 May 14, 2018
Shai Schechter and I have been working together on designing an LCD that runs 6 May 14, 2018
There are some MKS Base 1.5 controller boards on Ebay. 11 April 24, 2018
coooooooooool but, needs to support more extruders 3 April 1, 2018
This is the next step in the evolution of integrated Linux (+ realtime) RepRap 4 March 31, 2018
I didn't see this get cross posted yet, lmk if I missed it. 4 March 27, 2018
I have a Rostock Max V1 from SeeMeCNC. 14 March 27, 2018
Hello! Planing to get a new motherboard for my anet a8 and what do 3 March 8, 2018
Hello all. I'm planing to build a new printer with dual extruder. 5 March 8, 2018
I am pleased to see that Replicape sends 12V to fans and sensors. 4 February 8, 2018
In case you're wondering what to do with a laptop, whose screen doesn't work. 17 February 7, 2018
Google+ post by TOPE designs on 2018-02-05 01:10:13 UTC 6 February 6, 2018
Google+ post by TOPE designs on 2018-02-03 00:48:28 UTC 1 February 3, 2018
Just finished this 3D printed instrument panel complete with 3d printed rubber keyboard with 27 January 23, 2018
I need some help with ramps and an external 5v supply for the BLtouch. 6 January 22, 2018